The EPEVER Tracer AN Series Photo voltaic Demand Controller is actually a hugely economical photo voltaic controller designed for off-grid solar techniques. Based upon multiphase synchronous rectification technologies, it assures optimized Strength conversion and process steadiness for a wide range of photovoltaic (PV) applications.
Important Characteristics with the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller technological know-how for excellent photo voltaic Strength harvesting. Critical capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Display with real-time details monitoring.
Numerous Load Manage Modes such as manual and timer.
Complete Electronic Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Action-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all components are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product selection and voltage scores match your solar panel and battery specs.
2. Mounting the Demand Controller
Pick out a very well-ventilated, dry spot near to the battery bank.
Protected the Tracer AN controller utilizing the presented mounting brackets.
Sustain correct clearance for heat dissipation.
three. Wiring the Photo voltaic Charge Controller
Caution: Normally observe right security protocols and make sure the program is driven off ahead of connecting parts.
Action 1: Connect the battery terminals into the cost controller (optimistic to good, negative to detrimental).
Phase 2: Hook up the solar panel array to the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Settings
Ability to the controller by connecting the battery very first.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port working with computer software such as Photo voltaic Station Computer.
Distant monitoring is feasible With all the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Challenge 1: No Electric power Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change system parameters if important.
Difficulty three: No Battery Charging
Inspect PV More info wiring for continuity.
Ensure MPPT configurations within the menu.
Great things about the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation guarantees:
Better Efficiency: Diminished energy losses for the duration of conversion.
Increased Dependability: Secure overall performance underneath variable hundreds.
Lengthier Battery Existence: Dependable and correct charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification know-how is definitely an Fantastic choice for optimizing solar power technology and extending battery existence. By pursuing the above set up guidebook, people can ensure highest performance and system longevity.